http://www.tracopower.com page 1 of 3 dc/dc converters tes 2n series, 2 watt features low profle smd-package wide 2:1 input voltage range i/o isolation 1500 vdc input flter meets en55022, class a operating temperature range C40c to +85c short-circuit protection qualifed for leadfree refow solder process according ipc j-std-020c available in tape and reel package 3-year product warranty ordercode input voltage range output voltage output current max. effciency typ. tes 2n-0510 3.3 vdc 500 ma 70 % tes 2n-0511 5 vdc 400 ma 73 % tes 2n-0512 4.5 C 9.0 vdc 12vdc 165 ma 75 % tes 2n-0513 (nominal 5 vdc) 15 vdc 135 ma 73 % tes 2n-0521 5 vdc 200 ma 64 % tes 2n-0522 12 vdc 85 ma 69 % tes 2n-0523 15 vdc 65 ma 71 % tes 2n-1210 3.3 vdc 500 ma 73 % tes 2n-1211 5 vdc 400 ma 77 % tes 2n-1212 9 C 18 vdc 12 vdc 165 ma 80 % tes 2n-1213 (nominal 12 vdc) 15 vdc 135 ma 80 % tes 2n-1221 5 vdc 200 ma 73 % tes 2n-1222 12 vdc 85 ma 78 % tes 2n-1223 15 vdc 65 ma 78 % tes 2n-2410 3.3 vdc 500 ma 72 % tes 2n-2411 5 vdc 400 ma 77 % tes 2n-2412 18 C 36 vdc 12 vdc 165 ma 80 % tes 2n-2413 (nominal 24 vdc) 15 vdc 135 ma 81 % tes 2n-2421 5 vdc 200 ma 74 % tes 2n-2422 12 vdc 85 ma 78 % tes 2n-2423 15 vdc 65 ma 80 % tes 2n-4810 3.3 vdc 500 ma 71 % tes 2n-4811 5 vdc 400 ma 73 % tes 2n-4812 36 C 75 vdc 12 vdc 165 ma 79 % tes 2n-4813 (nominal 48 vdc) 15 vdc 135 ma 79 % tes 2n-4821 5 vdc 200 ma 71 % tes 2n-4822 12 vdc 85 ma 77 % tes 2n-4823 15 vdc 65 ma 77 % models the tes-2n series is a family of high performance 2w dc/dc converter modules featuring wide 2:1 input voltage ranges. the 28 models come in a low profle smd package which requires just 3 cm 2 space on the pcb. a high effciency allows an operating temperature range of C40c to +85c. a built-in emi input flter complies with en 55022, class a. typical applications for these converters are battery ope - rated equipment, instrumentation, communication and industrial electronics, every - where where isolated, tightly regulated voltages are required. ul 60 95 0- 1 cb scheme
http://www.tracopower.com page 2 of 3 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. dc/dc converters tes 2n series 2 watt input specifications input current at full load (nominal input) 5 vin models: 600 ma typ. 12 vin models: 220 ma typ. 24 vin models: 110 ma typ. 48 vin models: 55 ma typ. surge voltage (100 msec. max.) 5 vin models: 11 v max. 12 vin models: 25 v max. 24 vin models: 50 v max. 48 vin models: 100 v max. conducted noise (input) en 55022 level a, fcc part 15, level a output specifications voltage set accuracy 2 % regulation C input variation vin min. to vin max. 0.5 % max. C load variation 25 C 100 % 0.75 % max. dual output models: 2.0 % (balanced load) ripple and noise (20 mhz bandwidth) 50 mvpk-pk max temperature coefficient 0.02 %/k short circuit protection indefinite, automatic recovery minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) capacitive load 3.3 vdc output models: 2200 f max. 5 vdc output models: 1000 f max. 12 vdc output models: 170 f max. 15 vdc output models: 110 f max. 5 vdc output models: 470 f max. 12 vdc output models: 100 f max. 15 vdc output models: 47 f max. general specifications temperature ranges C operating C40c to +85c C storage C55c to +125c derating 3.5 %/k above +71c humidity (non condensing) 95 % rel. h max. reliability, calculated mtbf ( m i l- h d b k-217 f, at +25c, ground benign) >1.0 mio h isolation voltage (60sec.) C input/output 1500 vdc isolation capacitance C input/output 250 pf isolation resistance C input/output (500 vdc) >1000 m ohm switching frequency 300 khz (pfm) safety standards ul 60950-1, iec/en 60950-1 safety approvals and C cb certificate (iec 60950-1) www.tracopower.com/products/tes2n-cb.pdf certifications C csa (file no. 226037) http:directories.csa-international.org
page 3 of 3 r e v. 07/12 specifcations can be changed any time without notice. dc/dc converters tes 2n series 2 watt outline dimensions pin single dual 1 Cvin (gnd) Cvin (gnd) 7 no con. no con. 8 no con. common 9 +vout +vout 10 Cvout Cvout 16 +vin +vin pin-out physical specifications casing material dap (ul94v-0 rated) weight 3.8 g ( 0.13 o z ) lead-free reflow solder process as per j-std-020d.01 (to find at: www.jedec.org - free registration re quired) moisture sensivity level (msl) level 2 as per j-std-033b.01 (to find at: www.jedec.org - free registration required) washing process www.tracopower.com/products/smd- wash.pdf packaging www.tracopower.com / products / tes2n -pack.pdf 24.0 (0.94) 0.25 (0.01) 8.0 (0.31) 18.1 (0.71) 13.7 (0.54) 15.24 (0.60) 2.54 (0.10) 3.11 (0.12) top view 17 8 16 10 9 0 - 4 0.15 1.0 (0.04) 2.8 (0.11) 13.7 (0.54) 15.24 (0.60) 2.54 (0.10) 3.11 (0.12) 1.4 (0.055) min. 2.8 (0.11) dimensions in [mm], () = inch tolerances 0.25 (0.01) pin pitch tolerances 0.05 (0.002) solder pad dimension application note: www.tracopower.com/products/tes2n-application.pdf jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|